Skip to content
Kuala Lumpur skyline

Construction Chemicals

Construction Chemicals

Waterproofing, sealants, grouts, repair mortars, admixtures and adhesives built for demanding sites.

Back to Products
METTEC MET - LASTIK PU500

METTEC MET - LASTIK PU500

METTEC MET – LASTIK PU 500 is an elastomeric liquid applied hybrid PU acrylic based waterproof coating formulated to give long – lasting, maintenance free and superior waterproofing protection for concrete substrates. METTEC MET – LASTIK PU500 offers the most advanced waterproofing technology and is guaranteed to provide long term performance

Enquire Now
METTEC MET - POROUS PP

METTEC MET - POROUS PP

METTEC MET- POROUS PP is one component Polyurethane base low viscosity primer for porous surfaces to be used with METTEC GG105 POLYSULPHIDE and METTEC PG101 POLYSULPHIDE.

Enquire Now
METTEC GG105 GUN GRADE POLYSULPHIDE

METTEC GG105 GUN GRADE POLYSULPHIDE

METTEC GG 105 GUN GRADE POLYSULPHIDE is a non – sagging, two components, chemical resistant, elastomeric, polysulphide joint sealant. METTEC GG 105 GUN GRADE POLYSULPHIDE is specially designed to be used as watertight seal for moderate movement and control joints. It is based on polysulphide polymer. After curing, it forms a tough, flexible and non – staining rubber like seal. It has excellent adhesion to concrete, stone, metal and resistant to many chemicals, shrinkage, ageing, thermal stress and effects of outdoor exposure. METTEC GG 105 GUN GRADE POLYSULPHIDE is suitable for use in both vertical and horizontal applications.

Enquire Now
METTEC PG 101 POUR GRADE POLYSULPHIDE

METTEC PG 101 POUR GRADE POLYSULPHIDE

METTEC PG 101 POUR GRADE POLYSULPHIDE is a two – component pourable, self levelling polysulphide resin based joint sealant. METTEC PG 101 POUR GRADE POLYSUPLHIDE is specially designed to be used as a watertight seal for moderate movement and control joints in horizontal areas. METTEC PG 101 POUR GRADE POLYSULPHIDE has excellent adhesion to concrete, stone, metal, PVC and other common building surfaces. The cured sealant has good resistant to most environmental chemical and resists deterioration on prolonged exposure to UV. METTEC PG 101 POUR GRADE POLYSULPHIDE is suitable for use in horizontal areas with a maximum slope gradient of 10%.

Enquire Now
METTEC MET - PLUG

METTEC MET - PLUG

METTEC MET – PLUG is a specially developed one component formulation, which stops leakage, seepage and running water in concrete or masonry walls and floors within minutes. It provides immediate and reliable repair work against undesired water leakage. METTEC MET – PLUG is free from chlorides and other harmful substances, and can be universally used to stop leaking and running water in concrete as well as brickwork.

Enquire Now
METTEC MET - SEAL 102

METTEC MET - SEAL 102

METTEC MET – SEAL 102 is a two – part and polymer modified and flexible cementitious waterproofing coating. It is applied to concrete and mortar to prevent water infiltration in severe conditions. It is also enhancing the ability of substrates to resist sulphate attack and limits carbon dioxide penetration.

Enquire Now
METTEC METKRETE MC80

METTEC METKRETE MC80

METTEC METKRETE MC 80 is a special blend of low heat cement with proprietary additives, super – plasticizers and graded aggregates. It is ideal for concrete repair situations where there is little or no access for compaction

Enquire Now
METTEC MET - SCREED G25

METTEC MET - SCREED G25

METTEC METSCREED G25 is a blend of Portland cement, graded aggregates, polymers and plasticizing additives designed to give a suitable working grade floor screed. Easy to apply and can be applied to thickness of 5 – 50mm.METTEC MET - SCREED G25 is an ideal underlayment to receive floor coverings such as carpets, vinyl tiles, floor panels and coatings or as a base screed to receive tiling.

Enquire Now
METTEC MET - DUR80

METTEC MET - DUR80

METTEC MET – DUR 80 is a two-component prepared epoxy adhesive for the bonding of metal plates, concrete, brickwork, ceramic and masonry. This adhesive is also suitable for the bonding of clay pipe to give a monolithic joint. This cured adhesive has very high chemical resistance. It is easy to process under normal conditions, e.g. ambient temperature and atmospheric pressure.

Enquire Now
METTEC MET - FLOOR HARD

METTEC MET - FLOOR HARD

METTEC MET – FLOOR HARD is a ready – to – use dry shake floor hardener composed of selected silica – quartz aggregates and cement. It provides a monolithic finish to screed or concrete surfaces which is abrasion and impact resistant. METTEC MET - FLOOR HARD is available in natural cement grey and other decorative colours.

Enquire Now
METTEC MET - GUARD RUST

METTEC MET - GUARD RUST

METTEC MET – GUARD RUST coating is a high – performance metal primer and rust treatment engineered with anti – corrosive zinc – phosphate pigments that prevents the development of rust. Suitable for new or corroded metal, METTEC MET – GUARD RUST coatings stop rust that may have already formed and creates a highly effective barrier against the formation of new rusts

Enquire Now
METTEC MET - THIN RENDER 510 (PREMIUM) MY

METTEC MET - THIN RENDER 510 (PREMIUM) MY

METTEC MET – THIN RENDER 510 (PREMIUM) MY is a high – quality polymer modified water resistant cement – based render. METTEC MET – THIN RENDER 510 (PREMIUM) MY is specially formulated for internal and external direct application onto RC concrete walls/panels and ceiling soffit surfaces for patching, repairing and surface levelling jobs. Recommended skimming with METTEC MET – BASE MY and smooth finishing with METTEC MET – FINISH COAT MY. For sanded texture, sponge the hardened rendered surface with damp sponge. Not suitable for painted surface

Enquire Now
METTEC MET - THIN RENDER 510 (STANDARD) MY

METTEC MET - THIN RENDER 510 (STANDARD) MY

METTEC MET – THIN RENDER 510 (STANDARD) MY is a high – quality polymer modified water resistant cement – based render. METTEC MET – THIN RENDER 510 (STANDARD) MY is specially formulated for internal and external application onto brick/block wall for patching, repairing and surface levelling job to give high quality plastered or sponged finish. Recommended skimming with METTEC MET – BASE MY and smooth finishing with METTEC MET – FINISH COAT MY. For sanded texture, sponge the hardened rendered surface with damp sponge. Not suitable for painted surface

Enquire Now
METTEC MET - FINISH COAT MY

METTEC MET - FINISH COAT MY

METTEC MET – FINISH COAT MY is a high – quality polymer modified water resistant cement – based finish coat recommended for smooth finishing works direct onto METTEC MET – FINISH COAT MY, plastered or concrete surfaces. Recommended for internal applications and not suitable for application onto painted surface.

Enquire Now
METTEC MET - BITUMINOUS PRIMER WB

METTEC MET - BITUMINOUS PRIMER WB

METTEC MET – BITUMINOUS PRIMER WB is an emulsified rubber bitumen protective coating. It can be applied on concrete, steel or wood where the area requires waterproofing by bituminous membrane

Enquire Now
METTEC MET - PROOF 4000M

METTEC MET - PROOF 4000M

METTEC MET-PROOF 4000 M are elastomeric waterproofing membranes manufactured in an advanced continuous calendaring process by saturating and coating a synthetic carrier with a waterproofing compound made of a special grade of bitumen, which is modified with APP polymers. While the APP polymers enhance the thermal, mechanical, and aging properties of the membranes compound, the mechanical characteristics of METTEC MET-PROOF 4000 M are established by the non-woven continuous filament spun-bond Polyester which acts as the reinforcement that provides the membrane with its tensile strength, tear resistance, puncture resistance and elongation properties. The upper surface of METTEC MET-PROOF 4000 M is covered with slate chips/granular (mineral self-protection) material while the lower surface is laminated with a thermo-fusible polyethylene film.

Enquire Now
METTEC MET - FORM EX

METTEC MET - FORM EX

METTEC MET – FORM EX is a chemical release agent for use on both timber and steel moulds. It is designed and formulated to function as a bond breaker between formwork or moulds and freshly placed concrete. METTEC MET – FORM EX offers protection to both steel and timber formwork as it acts as a rust inhibitor and waterproofing agent.

Enquire Now
METTEC MET - GROUT 70

METTEC MET - GROUT 70

METTEC MET – GROUT 70 is combination of Portland Cement, graded fillers and chemical additives. The low water demand ensures high early strength. The graded filler is designed to assist uniform mixing and produce a consistent grout.

METTEC MET – GROUT 70 is used for general purpose, non – shrink cementitious grouting of gap thickness upto 100mm. Recommended applications at flowable consistency include base plates, bolt pockets and void filling. At pumpable or flowable consistency, METTEC MET – GROUT 70 is recommended for bedding load bearing components.

Enquire Now
METTEC MET - GROUT 50

METTEC MET - GROUT 50

METTEC MET – GROUT 50 is combination of Portland Cement, graded fillers and chemical additives. The low water demand ensures high early strength. The graded filler is designed to assist uniform mixing and produce a consistent grout.

METTEC MET – GROUT 50 is used for general purpose, non – shrink cementitious grouting of gap thickness upto 100mm. Recommended applications at flowable consistency include base plates, bolt pockets and void filling. At pumpable or flowable consistency, METTEC MET – GROUT 50 is recommended for bedding load bearing components.

Enquire Now
METTEC MET - EXPAND SX131

METTEC MET - EXPAND SX131

METTEC MET – EXPAND SX 131 is an admixture for cementitious grouts and concrete where a reduced water/cement ratio and positive expansion is required. Applications include grouting of post tensioning cable ducting, non – shrink infilling and bed grouting

Enquire Now
METTEC MET - BETONFLOW 800PC

METTEC MET - BETONFLOW 800PC

METTEC MET - BETONFLOW 800PC is a ready to use concrete admixture based on polycarboxylate chemistry. Mettec Met – Betonflow 800PC can be used for early strength enhancement and to produce high performance concrete

Enquire Now
METTEC MET - KOTE RBE

METTEC MET - KOTE RBE

METTEC MET – KOTE RBE is a single component high build thixotropic, emulsified bitumen modified with hybrid PU pre – polymers, styrene acrylic and synthetic rubber copolymer of the high-performance neoprene type. The fusion of PU prepolymer and neoprene rubber in modified bitumen imparts special properties to the emulsion such as better elongation and cold flexibility. METTEC MET - KOTE RBE forms a tough rubber like membrane when fully cured.

Enquire Now
METTEC MET - MASTIK

METTEC MET - MASTIK

METTEC MET-MASTIK is a premium, fibre-toughened bituminous sealant enriched with mineral fillers for maximum durability of waterproofing, sealing and repairing. Engineered for the heavy-duty protection of concrete, metal, and asphalt, it forms a high-density, flexible barrier against water ingress and chemical exposure. Its superior bond strength and thick consistency make it an ideal solution for critical infrastructure projects, including bridge decks, tunnels, sub-structures, and industrial piping.

Enquire Now
METTEC betoNEX SLURRY

METTEC betoNEX SLURRY

METTEC betoNEX Slurry is a ready – mixed, cementitious, in – depth waterproofing slurry consists of Portland cement, finely graded sand and active chemicals. It is applied as cementitious slurry to the pre - saturated surface of above and below concrete structures

Enquire Now
METTEC MET - LATEX SBR

METTEC MET - LATEX SBR

METTEC MET – LATEX SBR is a synthetic rubber emulsion for adding to cement mortar, where good adhesion and water resistant are required. It is suitable for tropical conditions.

Enquire Now
METTEC MET - TILE ADHESIVE 68 MY

METTEC MET - TILE ADHESIVE 68 MY

METTEC MET – TILE ADHESIVE 68 MY is a thin thick premium grade polymer modified water resistant cement – based bed adhesive used for installation of porcelain/homogenous and ceramic tiles and other stoneware. It is designed with high pull – off strength and excellent workability for application with a bedding thickness of 6 – 8mm. Suitable for both internal and external application on concrete and rendered surfaces. Not recommended for use on plastic, wood, metal and painted surfaces.

Enquire Now
METTEC MET - TILE 20HP

METTEC MET - TILE 20HP

METTEC MET – TILE 20HP is a high – quality polymer modified water resistant cement – based bed adhesive used for installation of ceramic tiles and other stoneware on walls and floors of plastered and concrete surfaces. Not recommended for use on plastic, wood, metal and painted surfaces.

Enquire Now
METTEC MET - CURE WB

METTEC MET - CURE WB

METTEC MET – CURE WB is used as a water-based curing compound for concrete and cementitious surfaces. It helps reduce moisture loss during the curing process, allowing proper hydration and development of concrete strength. It is suitable for use on floors, walls, slabs, and other concrete surfaces, providing effective curing protection and helping to improve the durability and overall quality of the finished surface.

Enquire Now
METTEC MET - DURAL 43 LV

METTEC MET - DURAL 43 LV

METTEC MET – DURAL 43 LV is used as a low-viscosity epoxy resin for repairing and strengthening concrete structures. It is suitable for filling cracks, voids and cavities in concrete surfaces, as well as for injection applications where deep penetration is required. Its excellent flowability allows effective penetration into fine cracks and provides strong adhesion, helping to restore the integrity, durability and structural performance of concrete elements.

Enquire Now
METTEC MET -LASTIK PU SEALANT 600ML

METTEC MET -LASTIK PU SEALANT 600ML

METTEC MET – LASTIK PU SEALANT 600ML is a single-component polyurethane sealant designed for sealing and waterproofing construction joints, expansion joints, cracks, gaps and connections between different building materials. It provides excellent adhesion to concrete, masonry, metal, glass and other common substrates, while offering good flexibility and resistance to weathering. Its durable elastic properties allow it to accommodate joint movement and provide long-lasting protection against water and moisture penetration.

Enquire Now

Ready to build with a partner you can trust?

Tell us about your project — reinforcement, post-tensioning, testing equipment or chemicals — and our engineers will get back to you within one business day.